MT64 Suspension Kit with 1.75–3 in Front Lift, 2 in Rear Lift, 220–330 lb Front Load Rating, 0 lb Rear Load Rating, and Front Upper Control Arms for Land Cruiser 250 Series (2024–Present)

The Old Man Emu MT64 Suspension Kit with Front Upper Control Arms is configured for Land Cruiser 250 Series vehicles requiring additional front suspension support without a corresponding rear load requirement. The front MT64 coilovers provide 1.75–3 inches of adjustable lift and are rated for 220–330 pounds of added weight, while the rear suspension provides 2 inches of lift with a 0-pound load rating.

The front supports a 220–330-pound load to accommodate additional weight over the front axle. The adjustable spring-seat design provides 1.75–3 inches of front lift, allowing the ride height to be set within the available range.

The upper control arms complement the raised front suspension, maintaining wheel alignment and bringing the factory alignment cams back into an acceptable range as the increased ride height changes the front suspension geometry.

Free-pivoting Giiro bushings let the upper control arms move with the suspension without requiring grease or routine lubrication. Their maintenance-free design reduces ongoing service needs while supporting suspension articulation.

The MT64 shocks feature 2.8-inch aluminum bodies with increased oil capacity for effective damping performance. Aluminum dissipates heat up to 15 times faster than steel and provides increased protection against stone damage.