MT64 Suspension Kit with 1.75–3 in Front Lift, 2 in Rear Lift, 0 lb Front Load Rating, 440 lb Rear Load Rating, and Front Upper Control Arms for Land Cruiser 250 Series (2024–Present)

The Old Man Emu MT64 Suspension Kit with Front Upper Control Arms provides a complete lifted suspension configuration for the Land Cruiser 250 Series, combining adjustable front ride height with a 2-inch rear lift and load-specific suspension components. The front is configured for a 0-pound added load rating, while the rear accommodates 440 pounds of additional weight.

The MT64 front coilovers provide 1.75–3 inches of adjustable lift. Multiple spring-seat positions allow the front ride height to be configured within the specified range without replacing coil springs for additional front-end weight.

The rear suspension adds 2 inches of lift and carries a 440-pound load rating, supporting moderate rear-mounted equipment and cargo while maintaining a configuration distinct from the higher-capacity rear suspension options.

The front upper control arms are designed for lifted builds. Their geometry maintains front alignment and can bring alignment cams back into an acceptable range when suspension changes affect the factory adjustment range.

Multiple snap-ring positions on the front MT64 coilovers provide adjustment across the 1.75–3-inch lift range. This allows the front suspension height to be set to the desired setup while retaining the specified 0-pound load rating.